Archives
 
Year 2022
 
Issue 4 [08 - 2022], Year XXXI

Development of а transmission function for a cable model system on the drilling machine СБШ - 250

https://mij.hoimovietnam.vn/en/archives?article=22049

  • Affiliations:

    1 Institute of Mining Science and Technology -Vinacomin
    2 Hanoi University of Mining and Geology, Hanoi

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 29th-Nov-2021
  • Revised: 15th-Nov-2021
  • Accepted: 15th-Feb-2022
  • Online: 31st-Aug-2022
Pages: 56 - 60
Views: 66
View onlineView online
Downloads: 0
Downdload PDF
★★★★★Rating: , Total rating: 0
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

The sling system (two pulleys multiplied by four) is an important power transmission part of the drill pusher mechanism on the drilling machine СБШ-250. This system reduces the transmitted force by four times and increases the travel distance of the drill bit up to four times. Because they are sling system, so they have stiffness C and viscosity coefficient . Therefore, the dynamic process on each pulley cable rope is a complecated process. The paper prefers to the development process of the transfer function for a cable model system, which has been simplified into two separate pulleys

How to Cite
Pham, L.Thanh, Ha, C.Thi and Tran, T.Thanh 2022. Development of а transmission function for a cable model system on the drilling machine СБШ - 250 (in Vietnamese). Mining Industry Journal. XXXI, 4 (Aug, 2022), 56-60. .
References

1. Liêm P.T (2020). Phát triển các hệ thống tự động điều khiển tốc độ quay và đẩy mũi khoan của máy khoan xoay cầu СБШ-250МН-32Т // P.T Liêm // Thông tin Đại học Tula, Tula, 2020, quyển 5, từ trang 216 đến 224 (Tiếng Nga).

2. Копылов И.П. Математическое моделирование электрических машин: Учеб. Для вузов/ И.П. Копылов / . – 3-е изд., и доп. – М.: Высш. шк., 2001. – 327 с.: ил.

3. V.T. Pham. Modelling of three-phase induction motor with changes in motor parameters // Pham V.T., Nguyen Q.T. // int. Science technology, vol 48, pp 21–25. Hanoi, 2018

4. K. S. Sandhu. Simulation study of three-phase induction motor with variations in moment of inertia //

K. S. Sandhu, Vivek Pahwa // ARPN Journal of Engineering and Applied Sciences, VOL. 4, NO. 6, AUGUST 2009, pp 72-77

5. Yongguang Liu. Structural Design and Simulation of Ejection Device with Pulley Block // Xusheng Jing, Yize Wan // Advances in Computer Science Research, volume 93, 2nd International Conference on Mathematics, Modeling and Simulation Technologies and Applications (MMSTA 2019)

6. Mathematical Modelling of Cable and Pulley Systems // Jon Andreas Moseid // Norwegian University of Science and Technology, June 2017, 109p

7. Enjcient modelling of flexible cable-pulley systems // Markus Spiegelhauer , Berthold Schlecht // Forsch Ingenieurwes (2021) 85: 67–75p // https://doi.org/10.1007/s10010-020-00433-y,

Other articles