Discussion on solutions to reduction of rock mass stress around coal seam roadway in Quang Ninh underground mines

https://mij.hoimovietnam.vn/en/archives?article=25011
  • Affiliations:

    1 Ha Noi University of Mining and Geology, 18.Vien Street, Ha Noi, Vietnam
    2 Institute of Mining Science and Technology, 3.Phan Dinh Giot, Ha Noi, Vietnam

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 2nd-Nov-2024
  • Revised: 23rd-Dec-2024
  • Accepted: 5th-Jan-2025
  • Online: 1st-Feb-2025
Pages: 5 - 13
Views: 93
Downloads: 7
Rating: , Total rating: 0
Yours rating

Abstract:

At present, underground coal mines in the Quang Ninh region are increasingly being developed deeper and extending production areas further from the center, leading to a larger volume of tunnel excavation and increased pressure. According to statistics, the annual volume of roadways supported and cut in underground coal mining units ranges from 56,000 to 76,000 meters (approximately 25 to 30% of the total new tunnel excavation), which increases costs and raises safety risks during the mining process. This has a significant impact on labor safety and the efficiency of underground coal mining units. In this paper, the authors conducted research and synthesized analyses of solutions to enhance the stability of coal seam roadways. The solutions include calculation methods, the selection of support structures and rock pressure reduction techniques, as well as the mechanisms for pressure reduction and their application conditions in various countries around the world. Based on this, the paper proposes solutions to reduce stress in the rock mass surrounding the roadways tailored to the geological and technical conditions of underground coal mines in the Quang Ninh region with the aim of improving roadway stability and reducing the volume of support and cut required during production.

How to Cite
Pham, D.Hung, Pham, V.Quan and Than, V.Duy 2025. Discussion on solutions to reduction of rock mass stress around coal seam roadway in Quang Ninh underground mines (in Vietnamese). Mining Industry Journal. XXXIV, 1 (Feb, 2025), 5-13. .
References

[1]. Tập đoàn Công nghiệp Than - Khoáng sản Việt Nam (2023). Báo cáo khối lượng mỏ TKV giai đoạn 2018-2023

[2]. Đào Viết Đoàn (2016). Phân bổ ứng suất xung quanh lò chợ và và xác định kích thước trụ bảo vệ khi đào đường lò gần khu vực đã khai thác. Công nghiệp mỏ, số 3-2016, 76-79.

[3]. Trần Tuấn Ngạn, et al., 2023. Kết quả áp dụng thử nghiệm công nghệ khai thác không để lại trụ bảo vệ tại khu Khe Chàm I - Công ty Than Hạ Long. Công nghiệp mỏ, số 2, 12-21

[4]. Chuan Yang, et al. (2017). Laboratory and numerical experiments on pressure relief mechanism of large-diameter boreholes. Chin. J. Geotech. Eng, 39, 1115–1122.

[5]. Dou Linming, et al. (2020). Study on prevention technology of rock burst by break-tip blasting and its effect estimation. Coal Sci Technol. 48:24–32.

[6]. Fulian He, et al. (2016). Deformation and failure mechanism and control technology of large section coal roadway subjected to severe mining dynamic load. Journal of Mining and Safety Engineering, vol. 33, no. 3, pp. 423–440.

[7]. Gu Shitan, et al. (2012). Study on the pressure relief mechanism and engineering application of segmented enlarged-diameter boreholes. Sustainability, 14(9), 5234.

[8]. Hao Jian, et al. (2022). Analysis of surrounding rock control technology and its application on a dynamic pressure roadway in a thick coal seam. Energies, 15(23), 9040.

[9]. Kang Hongpu, et al. (2022). Destressing technology for rock around coal mine roadways and its applications. Coal Science and Technology, 50(6), 1-15.

[10]. Konicek, P., et al. (2017). Rockburst prevention via destress blasting of competent roof rocks in hard coal longwall mining. In ISRM AfriRock-Rock Mechanics for Africa. ISRM-2017-035.

[11]. Liu Zhigang, et al. (2022). Study on rationality of large diameter pressure relief drilling parameters under different coal seam conditions. Geotechnical and Geological Engineering, 40(11), 5425-5436.

[12]. Qi Fuzhou, et al. (2021). Stability Control Mechanism of High‐Stress Roadway Surrounding Rock by Roof Fracturing and Rock Mass Filling. Advances in Civil Engineering, 2021(1), 6658317.

[13]. Roux AJA, et al. (1958). De-stressing: a means of ameliorating rockburst conditions: Part I: The concept of de-stressing and the results obtained from its application. Journal of the Southern African Institute of Mining and Metallurgy (JSAIMM) 59(1): 66–68.

[14].Wang Jiong, et al. (2014). Failure mechanism of the subinclined shaft in floor under mining influence and its control. Journal of China Coal Society, vol. 39, no. 8, pp. 1463–1472.

[15]. Wu Shaokang, et al. (2014). Study on the stress evolution law of surrounding rock and co- operative control technology in coal seam group mining

[J]. Coal Science and Technology 52, 24−37.

[16]. Zhang Hua-lei, et al. (2013). Study on failure evolution laws and control technology of roadway surrounding rock under mining circumstances. Journal of Mining and Safety Engineering, vol. 30, no. 5, pp. 653–664.

[17]. Zhang Shichuan, et al. (2019). Effective evaluation of pressure relief drilling for reducing rock bursts and its application in underground coal mines. Int. J. Rock Mech. Min. Sci. 2019, 114, 7–16

[18]. Елкии И . С ., и д р. (2013). Расчет эффективного радиуса увлажнения при использовании поверхностно-активных веществ. Вестник Кузбасского государственного технического университета, (4 (98)), 10-13.5.5.

[19]. Макнии, ВостНИГРИ (1966). Инструкция по борьбе с пылью методом предварительного увлажнения угольных пластов. Издательство Недра (1966 г. )

[20]. Скопинцева О. В. и др. (2006). Научные основы влагохимреагентной тепловой обеспыливающей обработки угольного массива и горной массы. Горный информационно-аналитический бюллетень (научно-технический журнал) 3: 210-218.

[21]. СНиП П-94-80. Подземные горные выработки

Other articles