Archives
 
Year 2023
 
Issue 5 [10 - 2023], Year XXXII

Research into the influence of some technological parameters of centrifugal casting to manufacture of axial propellers on its aerodinamic characteristics

https://mij.hoimovietnam.vn/en/archives?article=23055

  • Affiliations:

    Hanoi Hanoi University of Mining and Geology

  • *Corresponding:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Received: 21st-Apr-2023
  • Revised: 20th-May-2023
  • Accepted: 28th-May-2023
  • Online: 30th-Oct-2023
Pages: 30 - 38
Views: 124
View onlineView online
Downloads: 1
Downdload PDF
★★★★★Rating: , Total rating: 0
  • ★
  • ★
  • ★
  • ★
  • ★
Yours rating

Abstract:

This study is to evaluate the influence of some parameters in the centrifugal casting process on the performance of the received axial fan. It has been found that the quality of the surface state, material characteristics and blade design method has a great influence on the performance of the fan. The use of conventional centrifugal casting is an innovative innovation and is well suited for fabricating hollow-blade fans. With this method it is possible to reduce costs and fabricate relatively easily. In addition, the hollow characteristics of the fan give the fan many advantages, especially in the active control of the flow of losses on the blade tip position with the box housing and the ability to absorb sound. In this study, the material used was low-density polyethylene (LDPE). The parameters of the studied process include: powder mass (Polyethylene), temperature and heating time in the oven. For comparison, a fan with similar geometric dimensional parameters machined with the aluminum serves as a reference fan. Aerodynamic performance of fans tested on test bench standard ISO 5801. Analyses and comparisons are made based on the parameters selected for the fan fabrication process. The results show that the optimal choice of manufacturing process variables is necessary to achieve the desired mechanical performance for the fans fabricated by this technology.

How to Cite
Dang, D.Vu, Nguyen, X.Van and Nguyen, H.The 2023. Research into the influence of some technological parameters of centrifugal casting to manufacture of axial propellers on its aerodinamic characteristics (in Vietnamese). Mining Industry Journal. XXXII, 5 (Oct, 2023), 30-38. .
References

1. Pellicer Sifres V. (2008), Design and quali cation of rotomoulding cooling fans, Project nal dissertation, Ensam.

2. Pérot E. (2006), Optimization and modelling of rotational moulding process, PhD Thesis, Arts et Métiers.

3. Crawford R et al. (2004), Mould pressure control in rotational moulding, Proc. Instn Mech. Engrs

218 Part B: J. Eng. Manufacture, 1683-1693. 4. Spence AG et al. (1996), The E ect of Processing Variables on the Formation and Removal of Bubbles in Rotationally Molded Products, Polymer eng. and science, 36, 993-1009.

5. Azzam T et al. (2017), Experimental investigation of an actively controlled automotive cooling fan using steady air injection in the leakage gap. Proc Inst Mech Eng Part A - J Power Energy, 231, 59–67.

6. Tarik Azzam. (2018), Aérodynamique et contrôle de l’écoulement de jeu dans un ventilateur axial obtenu par rotomoulage. Thèse Doctorat (PhD).

7. Albert Lucas et al. (2019), Conventional rotational molding process and aerodynamic characteristics of an axial-?ow hollow blades rotor. The International Journal of Advanced Manufacturing Technology,

104(1):1183–1194.

8. Sarraf C et al. (2011), Experimental study of blade thickness e ects on the overall and local performances of a controlled vortex designed axial-?ow fan. Experimental Thermal and Fluid Science,

35 684–693.

9. Marrero Md et al. (2014), Rotational molding applied to the manufacturing of blades of small wind turbine. ASME 2014 12th Bienn Conf Eng Syst Des Anal 3

10. Mark Kearns and RJ Crawford. (2003), Practical guide to rotational moulding.

11. Roy J Crawford. (2012), Practical guide to rotational moulding. Smithers Rapra. 12. Abdelkader AZIZI. (2016), Etude par spectroscopie infrarouge et raman de la transition de phase dans le picrate de pyridine, Thèse de doctorat, Université 08 Mai 1945 de Guelma.

13. John Coates. (2006), Interpretation of infrared spectra, a practical approach. Encyclopedia of analytical chemistry: applications, theory and instrumentation.

14. ISO, “Norme internationale ISO 5801. (2007), Ventilateurs industriels - Essais aérauliques sur circuits normalisés.”, fr, p. 248.

. Vu-Dinh DANG. (2021), Étude de l’in?uence des paramètres du procédé de rotomoulage sur les caractéristiques aérodynamiques de fonctionnement d’un ventilateur axial. Thèse Doctorat (PhD).

Other articles